跳到主要內容

Apache Camel - Apply the REST with Netty-http and SSL

網路找到的大都是透過xml設定SSL到RestConfiguration中,後來實驗出透過coding的方法。

Java

 
import java.io.File;
import java.util.Scanner;
 
import org.apache.camel.CamelContext;
import org.apache.camel.Exchange;
import org.apache.camel.builder.RouteBuilder;
import org.apache.camel.component.netty4.http.NettyHttpComponent;
import org.apache.camel.component.netty4.http.NettyHttpMessage;
import org.apache.camel.impl.DefaultCamelContext;
import org.apache.camel.model.rest.RestBindingMode;
import org.apache.camel.util.jsse.KeyManagersParameters;
import org.apache.camel.util.jsse.KeyStoreParameters;
import org.apache.camel.util.jsse.SSLContextParameters;
import org.junit.Test;
 
 
public class TestCamel2 {
	private EventHandler eventHandler = new EventHandler();
 
	public static class EventHandler {		
		public void receiveServiceEvent(String id, Exchange exchange){
			NettyHttpMessage message = exchange.getIn().getBody(NettyHttpMessage.class);
 
			System.out.println("body: " + message.getBody());
 
			System.out.println("id: " + id);
			exchange.getOut().setHeader(Exchange.HTTP_RESPONSE_CODE, 200);
		}
	}
 
	private SSLContextParameters createSSLContextParameters(){
		String keystore = new File("./certificate/.keystore").getAbsolutePath();
		String passwd = "changeit";
 
		KeyStoreParameters ksp = new KeyStoreParameters();
		ksp.setResource(keystore);
		ksp.setPassword(passwd);
 
		KeyManagersParameters kmp = new KeyManagersParameters();
		kmp.setKeyStore(ksp);
		kmp.setKeyPassword(passwd);
 
		SSLContextParameters scp = new SSLContextParameters();
		scp.setKeyManagers(kmp);
		return scp;
	}
	private RouteBuilder createRouteBuilder(CamelContext context){
		return new RouteBuilder() {
			@Override
			public void configure() throws Exception {
				NettyHttpComponent nettyComponent = context.getComponent("netty4-http", NettyHttpComponent.class);
				nettyComponent.getConfiguration().setSslContextParameters(createSSLContextParameters());
 
				restConfiguration().component("netty4-http").port(8444).bindingMode(RestBindingMode.auto).endpointProperty("ssl",  "true");
				rest("/services/{id}").get().route().bean(eventHandler, "receiveServiceEvent(header.id)");
			}
		};
	}
 
	@Test
	public void test() throws Exception {
 
		CamelContext context = new DefaultCamelContext();
		try {
			context.addRoutes(createRouteBuilder(context));
			context.start();
 
			System.out.println("Enter");
			Scanner s = new Scanner(System.in);
			s.next();
			s.close();
		} finally {
			context.stop();
		}
	}
}

Ivy

<dependency org="org.apache.camel" name="camel-core" rev="2.20.1"/>
<dependency org="org.apache.camel" name="camel-netty4-http" rev="2.20.1"/>
<dependency org="org.apache.camel" name="camel-http-common" rev="2.20.1"/>
<dependency org="io.netty" name="netty-all" rev="4.1.17.Final"/>
<dependency org="org.apache.camel" name="camel-netty4" rev="2.18.3"/>

Reference

留言

這個網誌中的熱門文章

Show NIC selection when setting the network command with the device option

 Problem  在answer file中設定網卡名稱後,安裝時會停在以下畫面: 所使用的command參數如下: network --onboot = yes --bootproto =dhcp --ipv6 =auto --device =eth1 Diagnostic Result 這樣的參數,以前試驗過是可以安裝完成的。因此在發生這個問題後,我檢查了它的debug console: 從console得知,eth1可能是沒有連接網路線或者是網路太慢而導致的問題。後來和Ivy再三確認,有問題的是有接網路線的網卡,且問題是發生在activate階段: Solution 我想既然有retry應該就有次數或者timeout限制,因此發現在Anaconda的說明文件中( link ),有提到dhcptimeout這個boot參數。看了一些人的使用範例,應該是可以直接串在isolinux.cfg中,如下: default linux ksdevice = link ip =dhcp ks =cdrom: / ks.cfg dhcptimeout = 90 然而我在RHEL/CentOS 6.7與6.8試驗後都無效。 因此我就拿了顯示的錯誤字串,問問Google大師,想找一下Anaconda source code來看一下。最後找到別人根據Anaconda code修改的版本: link ,關鍵在於setupIfaceStruct函式中的setupIfaceStruct與readNetConfig: setupIfaceStruct: 會在dhcp時設定dhcptimeout。 readNetConfig: 在writeEnabledNetInfo將timeout寫入dhclient config中;在wait_for_iface_activation內會根據timeout做retry。 再來從log與code可以得知,它讀取的檔案是answer file而不是boot command line。因此我接下來的測試,就是在answer file的network command上加入dhcptimeout: network --onboot = yes --bootproto =dhcp --ipv6 =auto --device =eth1 --dhcptimeo

解決RobotFramework從3.1.2升級到3.2.2之後,Choose File突然會整個Hand住的問題

考慮到自動測試環境的維護,我們很久以前就使用java去執行robot framework。前陣子開始處理從3.1.2升級到3.2.2的事情,主要先把明確的runtime語法錯誤與deprecate item處理好,這部分內容可以參考: link 。 直到最近才發現,透過SeleniumLibrary執行Choose File去上傳檔案的動作,會導致測試案例timeout。本篇文章主要分享心路歷程與解決方法,我也送了一條issue給robot framework: link 。 我的環境如下: RobotFramework: 3.2.2 Selenium: 3.141.0 SeleniumLibrary: 3.3.1 Remote Selenium Version: selenium-server-standalone-3.141.59 首先並非所有Choose File的動作都會hang住,有些測試案例是可以執行的,但是上傳一個作業系統ISO檔案一定會發生問題。後來我透過wireshark去比對新舊版本的上傳動作,因為我使用 Remote Selenium ,所以Selenium會先把檔案透過REST API發送到Remote Selenium Server上。從下圖我們可以發現,在3.2.2的最後一個TCP封包,比3.1.2大概少了500個bytes。 於是就開始了我trace code之路。包含SeleniumLibrary產生要送給Remote Selenium Server的request內容,還有HTTP Content-Length的計算,我都確認過沒有問題。 最後發現問題是出在socket API的使用上,就是下圖的這支code: 最後發現可能因為開始使用nio的方式送資料,但沒處理到尚未送完的資料內容,而導致發生問題。加一個loop去做計算就可以解決了。 最後我有把解法提供給robot framework官方,在他們出新的版本之前,我是將改完的_socket.py放在我們自己的Lib底下,好讓我們測試可以正常進行。(shutil.py應該也是為了解某個bug而產生的樣子..)

PostgreSQL - Unattended installation on windows

Introduction 要將別人軟體包裝到自己軟體中,不可或缺的東西就是Unattended installation。以Unattended installation來說,我們可以選擇透過Installer的silent mode安裝,也可以透過把目標軟體做成portable的版本。本篇文章分享這兩種方法,教導大家如何將PostgreSQL透過Unattended installation方式安裝到目標系統成為service。 Note. 本篇以PostgreSQL 10.7為例。 Install with installer Tips 安裝程式或反安裝程式的參數,除了可以直接上官網搜尋Installation User Guide以外,也可以直接使用help參數查詢: postgresql- 10.7 - 2 -windows-x64.exe --help Windows安裝程式主要有EnterpriseDB與BigSQL兩種。BigSQL版本安裝元件是透過網路下載且支援參數不如EnterpriseDB版本多,以我們需求來說,我們傾向於使用EnterpriseDB版本。接下來分享給大家安裝與反安裝方法。 Installation @ echo off set INSTALL_DIR =C:\postgres10 set INSTALLER =postgresql- 10.7 - 2 -windows-x64.exe   rem options for installation set SSMDB_SERVICE =postgresql- 10 set MODE =--unattendedmodeui none --mode unattended   set DB_PASSWD =--superpassword postgres set DB_PORT =--serverport 5432   set SERVICE_NAME =--servicename % SSMDB_SERVICE %   set PREFIX =--prefix "%INSTALL_DIR%" set DATA_DIR =--datadir "%INSTALL_DIR%\data"   set OPTIONS =