差異處
這裏顯示兩個版本的差異處。
| Both sides previous revision 前次修改 下次修改 | 前次修改 | ||
|
osprovision:kickstart:vmware_esxi:debug_commands [2020/02/20 16:09] tony |
osprovision:kickstart:vmware_esxi:debug_commands [2023/06/25 09:48] (目前版本) |
||
|---|---|---|---|
| 行 2: | 行 2: | ||
| ====== VMWare ESXI Provision - Debug常用指令 ====== | ====== VMWare ESXI Provision - Debug常用指令 ====== | ||
| ===== Network Related Command ===== | ===== Network Related Command ===== | ||
| + | 在pure IPv6環境下，可以使用以下cmd去避免dhcp取不到而發生錯誤的情形: | ||
| + | <code bash> | ||
| + | esxcfg-vmknic -U V4 "Management Network" | ||
| + | </code> | ||
| List vmknic info: | List vmknic info: | ||
| <code bash> | <code bash> | ||
| 行 15: | 行 19: | ||
| localcli network ip interface add --interface-name=vmk1 --portgroup-name=VMkernel1 | localcli network ip interface add --interface-name=vmk1 --portgroup-name=VMkernel1 | ||
| localcli network ip interface ipv4 set --interface-name=vmk1 --type=dhcp | localcli network ip interface ipv4 set --interface-name=vmk1 --type=dhcp | ||
| - | localcli network ip interface ipv6 set --interface-name=vmk1 --enable-dhcpv6=true | + | # localcli network ip interface ipv6 set --interface-name=vmk1 -d true -r true |
| + | localcli network ip interface ipv6 set --interface-name=vmk1 --enable-dhcpv6=true --enable-router-adv=true | ||
| </code> | </code> | ||
| Remove vmknic: | Remove vmknic: | ||
